Below is what is displayed when a RED BRICK is connected to the camera DC IN connector and a
REDvolt is installed into the side handle. Note that Brain is displayed in a percentage as opposed to a
voltage as when connected to DC power.
SHUTDOWN
Power OFF controls are interlocked to prevent accidental powering down of the camera. For details on the
different ways to power down your RED EPIC, refer to BASIC OPERATION > POWER DOWN.
1. Enter the Secondary Menu using the touch screen, REDmote or Side Handle.
2. Select POWER.
3. Select SHUTDOWN. The camera will immediately power down.
Version 1.7.10
131
NOVEMBER 17, 2011
©2011 RED.COM INC.