Control Functions; Control Panel - Sundance Spas Burlington Owner's Manual

8.0 Control Functions

8.1 Control Panel

A. LED Display: Can display current water
temperature (default display), water
temperature set point, selected filtration/
heating mode, and error messages.
B. Heat Indicator: Lit when heater is on.
C. Warmer (
D. Cooler (
E. Jets 1 Button: Turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump off.
F. Jets 2 Button (Hartford and Hawthorne Models): Turns jets pump
#2 on and off. Press once for high speed; press a second time to turn
pump off.
G. Light Button:
• Denali and Tacoma Models: Turns underwater light on in random
mode or in one of six solid colors. Refer to Section 9.3 (page 24) for
details.
• Burlington, Hartford and Hawthorne Models with standard Incandes-
cent light system: Turns underwater light on and off. Refer to Section
9.4 (page 24) for details.
• Burlington, Hartford and Hawthorne Models with optional LED light-
ing system: Turns underwater light and top rim accent lights on in
one of three random modes or one of seven solid colors. Refer to
Section 9.5 (page 24) for details.
Operation Details
• Temperature Adjustment: 65 to 104°F (18 to 40°C). Factory default
setting is 100°F (38°C).
• All lighting systems run for 1 hour then shut off.
• Jets 1/Jets 2 Button Operation: Jets run for 20 minutes after acti-
vated, then turn off automatically to conserve energy. Simply press
either jets button to continue operation for an additional 20 minutes.
) Button: Increases water temperature set point.
) Button: Decreases water temperature set point.
A
B
C D
E F G
2 Pump Panel Shown
Page 21