Table of Contents
Advertisement
outlets, or windshield. Five symbols are
used to represent Face, Bi-Level, Floor,
Floor-Defrost and Defrost air positions.
2. Air intake control.
This allows you to select fresh outside air
or recirculation inside air.
3. Fan speed control.
This is used to turn the fan on and select
the fan speed.
4. Temperature control.
This is used to turn the heating system on
and off and to select the degree of heating
desired.
B670B01A-AAT
Fan Speed Control (Blower Control)
This is used to turn the blower fan on and off
and to select the fan speed.
The blower fan speed, and therefore the vol-
ume of air delivered from the system, may be
1- 46
FEATURES OF YOUR HYUNDAI
controlled manually by setting the blower con-
trol between the "1" and "4" position.
B670C01Y-AAT
Air Intake Control
This is used to select fresh outside air or
recirculation inside air.
Fresh
Recirculation
With the "
" mode selected, air enters the
vehicle from outside and is heated or cooled
according to the other functions selected.
B670B01O
With the "
" mode selected, air from within
the passenger compartment is drawn through
the heating system and heated or cooled
according to the other functions selected.
NOTE:
o It should be noted that prolonged op-
eration of the heating system in "
mode will give rise to fogging of the
windshield and side windows and the
air within the passenger compartment
will become stale. In addition prolonged
use of the air conditioning with the "
mode selected may result in the air
within the passenger compartment be-
coming excessively dry.
o When the ignition switch is turned "ON"
the air intake control will change to
"
" mode (regardless of switch posi-
tion). It is normal operation.
B670D02S-AAT
Air Flow Control
B670C02O
This is used to direct the flow of air. Air can be
directed to the floor, dashboard outlets, or
windshield. Five symbols are used to repre-
sent Face, Bi-Level, Floor, Floor-Defrost and
Defrost air position.
"
"
B670D01O
Advertisement
Table of Contents
