Table of Contents
Advertisement
G130B02A-AAT
To Replace the Fluid
To Replace the Fluid
To Replace the Fluid
To Replace the Fluid
To Replace the Fluid
Recommended brake fluid conforming to DOT
3 or DOT 4 specification should be used. The
reservoir cap must be fully tightened to avoid
contamination from foreign matter or moisture.
NOTE:
NOTE:
NOTE:
NOTE:
NOTE:
Do not allow any other liquids to contami-
Do not allow any other liquids to contami-
Do not allow any other liquids to contami-
Do not allow any other liquids to contami-
Do not allow any other liquids to contami-
nate the brake fluid. Seal damage will result.
nate the brake fluid. Seal damage will result.
nate the brake fluid. Seal damage will result.
nate the brake fluid. Seal damage will result.
nate the brake fluid. Seal damage will result.
WARNING:
WARNING:
WARNING:
WARNING:
WARNING:
Use caution when handling brake fluid. It
Use caution when handling brake fluid. It
Use caution when handling brake fluid. It
Use caution when handling brake fluid. It
Use caution when handling brake fluid. It
can damage your vision if you get it in your
can damage your vision if you get it in your
can damage your vision if you get it in your
can damage your vision if you get it in your
can damage your vision if you get it in your
eyes. It will also damage your vehicle's paint
eyes. It will also damage your vehicle's paint
eyes. It will also damage your vehicle's paint
eyes. It will also damage your vehicle's paint
eyes. It will also damage your vehicle's paint
if spilled on it and not removed immediately.
if spilled on it and not removed immediately.
if spilled on it and not removed immediately.
if spilled on it and not removed immediately.
if spilled on it and not removed immediately.
G140A01A-AAT
AIR CONDITIONING CARE
AIR CONDITIONING CARE
AIR CONDITIONING CARE
AIR CONDITIONING CARE
AIR CONDITIONING CARE
Keeping the Condenser Clean
Keeping the Condenser Clean
Keeping the Condenser Clean
Keeping the Condenser Clean
Keeping the Condenser Clean
The air conditioning condenser (and engine
radiator) should be checked periodically for
accumulation of dirt, dead insects, leaves, etc.
These can interfere with maximum cooling effi-
ciency. When removing such accumulations,
brush or hose them away carefully to avoid
bending the cooling fans.
6-12
DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
DO-IT-YOURSELF MAINTENANCE
G140B01A-AAT
Checking the Air Conditioning Opera-
Checking the Air Conditioning Opera-
Checking the Air Conditioning Opera-
Checking the Air Conditioning Opera-
Checking the Air Conditioning Opera-
tion
tion
tion
tion
tion
1. Start the engine and let it run at a fast idle for
several minutes with the air conditioning set
at the maximum cold setting.
2. If the air coming out of the in-dash vents is
not cold, have the air conditioning system
inspected by your Hyundai dealer.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Running the air conditioning system for
Running the air conditioning system for
Running the air conditioning system for
Running the air conditioning system for
Running the air conditioning system for
extended periods of time with a low refriger-
extended periods of time with a low refriger-
extended periods of time with a low refriger-
extended periods of time with a low refriger-
extended periods of time with a low refriger-
ant level may damage the compressor.
ant level may damage the compressor.
ant level may damage the compressor.
ant level may damage the compressor.
ant level may damage the compressor.
G140C01A-AAT
Lubrication
Lubrication
Lubrication
Lubrication
Lubrication
To lubricate the compressor and the seals in
the system, the air conditioning should be run
for at least 10 minutes each week. This is
particularly important during cool weather when
the air conditioning system is not otherwise in
use.
G140D01A-AAT
Checking the Compressor Drive Belt
Checking the Compressor Drive Belt
Checking the Compressor Drive Belt
Checking the Compressor Drive Belt
Checking the Compressor Drive Belt
V6
Auto
tensioner
Eng.pulley COMP
Eng.pulley COMP
G140D01Y/G140D02Y
When the air conditioning is being used regular-
ly, the compressor drive belt tension should be
checked at least once a month with the engine
turned off.
To check the drive belt tension, press down on
the belt halfway between the engine crankshaft
and compressor pulleys. Pressing with your
finger, you should not be able to deflect this belt
anymore than 1/3 of an inch. If you have the
instruments to check it, with a force of 22 lb.
(98N), the deflection should be 0.315 inches
(approx 8.0 mm). If the belt is too loose, have it
adjusted by your Hyundai dealer.
DOHC
0.315 in.
Advertisement
Table of Contents
