1
FEATURES OF YOUR HYUNDAI
88
B670B03E-AAT
Fan Speed Control (Blower Control)
This is used to turn the blower fan on or off and
to select the fan speed.
This blower fan speed, and therefore the vol-
ume of air delivered from the system, may be
controlled manually by setting the blower con-
trol between the "1" and "4" positions.
"1" is lowest and "4" is the highest fan speed.
NOTE:
If the blower fan is off, the air intake control
is set to the fresh mode automatically.
HEATING CONTROLS
B690A01E-AAT
B670A01E-A
For normal heating operation, set the air intake
control to the fresh air (
flow control to the floor (
For faster heating, the air intake control should
be set in the recirculate (
If the windows fog up, set the air flow control to
the defrost (
) position. (The A/C will be on
automatically and "Fresh" mode will be acti-
vated.)
For maximum heat, rotate the temperature
control to "Warm".
BI-LEVEL HEATING
B700A01E-AAT
B690A01E-A
Your Hyundai is equipped with bi-level heating
) position and the air
controls.
) position.
o Set the air intake control to the fresh air (
position.
) position.
o Set the air flow control at the bi-level (
position.
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
B700A01E-A
)
)