Power Windows - Hyundai 2001 Santa Fe Owner's Manual

the system, it is necessary to take the
following steps;
1. Unlock the door with the key, the alarm
to be activated.
2. Insert the key in the ignition key cylin-
der and turn the ignition key to "ON"
position.
3. Wait for 30 seconds.
After completing the steps above, the sys-
tem will be disarmed.
B060A01Y-AAT
POWER WINDOWS (If installed)
(1)
The power windows operate when the ignition
key is in the "ON" position. The main switches
are located on the driver's armrest and control
the front and rear windows on both sides of
the vehicle. The windows may be opened by
depressing the appropriate window switch and
1- 6
FEATURES OF YOUR HYUNDAI
closed by pulling up the switch. To open the
window on the driver's side, press the switch(1)
halfway down. The window moves as long as
the switch is operated. To fully open the
driver's window automatically, press the switch
fully down. In automatic operation, the window
will fully open even if you let go of the switch.
To stop at the desired opening, pull up and
release the switch. In order to prevent opera-
tion of the passanger front and rear windows,
a window lock switch(2) is provided on the
armrest of the driver's door. To disable the
power windows, press the window lock switch.
To revert to normal operation, press the win-
dow lock switch a second time. The power
windows can be operated for 30 seconds
after the ignition key is turned to the "ACC" or
the "LOCK" position. However while the front
doors are opened with the key turned to
"LOCK" and removed, the power windows
cannot be operated.
(2)
B060A01O
WARNING:
(1) Be careful that someone's head, hands
and body are not trapped by a closing
window.
(2) Never try to operate the main switch on
the driver's door and the individual
door window switch in opposing direc-
tions at the same time. If this is done,
the window will stop and cannot be
opened or closed.
(3) Do not leave children alone in the car.
Always remove the ignition key for their
safety.
B060A02O