Separate Scan - Olivetti d-Color MF451 Instructions Manual

5.1 Basic
5.1.7

Separate Scan

When the original contains pages exceeding the capacity of the ADF, you can divide the original into several
batches to handle each lot as a single copy job. You can also use the copy function by switching between
the ADF and the original glass for scanning the originals.
0 Do not load original sheets beyond the upper limit for the ADF. It would cause jamming and/or spoiling
of the original or failure of the machine.
0 When making 2-sided or combined copies using the original glass, the machine can scan a number of
original pages without enabling Separate Scan.
1
Load the original.
2
In the Basic tab, press [Separate Scan].
3
Press the [Start] key.
The original is scanned.
4
Load the next batch of the original, and then press the [Start] key.
% To change the scanning settings, press [Change Setting].
5
Repeat Step 4 until all pages of the original are scanned.
6
After all original pages have been scanned, press [Finish].
7
Press the [Start] key.
d
Reference
To set the Separate Scan output method:
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings] ö [Separate Scan Output Method].
d-Color MF651/551/451
5
5-15