Copier Settings - Olivetti d-Color MF451 Instructions Manual

6.3

Copier Settings

6.3 Copier Settings
Configure the settings used by the copy functions.
%
Press the [Utility/Counter] key ö [User Settings] ö [Copier Settings].
Settings
Auto Booklet ON when
Fold & Staple
Auto Zoom for Com-
bine/Booklet
Auto Sort/Group Selection
Default Copy Settings
Default Enlarge Display
Settings
When AMS Direction is In-
correct
Separate Scan Output
Method
Enlargement Rotation
Auto Zoom (Platen)
Auto Zoom (ADF)
Specify Default Tray when
APS Off
Select Tray for Insert Sheet
d-Color MF651/551/451
Configure whether to automatically specify Booklet when Center Staple
and Fold is selected.
This item is displayed if the saddle stitcher is installed in the finisher.
Configure whether the preset zoom ratios are automatically selected when
Combine or Booklet is selected in Auto Paper mode.
• Select the recommended zoom ratios for the following zoom settings:
2 in 1, Booklet: 70.7%
4 in 1: 50.0%
8 in 1: 35.3%
Configure whether to output the copied pages automatically in Sort mode
when copying multiple-page original using the ADF.
Configure the initial values for the Copy function to be displayed when the
power in turned on or the [Reset] key is pressed.
Current Setting The current settings are used as the default set-
tings.
Factory Default The factory settings are used as the default set-
tings.
This setting is for the enlarged display screen operations. For details, refer
to the "User's Guide [Enlarge Display Operations]".
Configure whether to print or discard the job when the original orientation
does not match that of paper in Auto Zoom mode.
Configure the output for divided original loaded in the ADF or for multiple
pages of the original scanned on the original glass.
Page Print Printing of copies that can be printed begins while
the original is being scanned.
Batch Print Printing begins after all pages of the original have
been scanned.
Configure whether to rotate and print a large-size original image when the
original orientation does not match that of paper.
Appears when user access is permitted under Administrator settings. For
details, refer to page 7-45.
6
6-9