Color Registration Adjust - Olivetti d-Color MF451 Instructions Manual

7.1 System Settings

Color Registration Adjust

If color shifts are detected in the print result, adjust the each color print position for each paper type.
0 The procedure for adjusting the color registration is the same for yellow, magenta and cyan.
1
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Color Registration Adjust].
2
Select a color to be corrected.
3
Select a paper type for which color registration is adjusted.
4
Load the paper into the bypass tray.
% The loadable paper size is A3w, 11 e 17w, A4v, or 8-1/2 e 11v.
5
Press the [Start] key.
A test pattern is printed.
6
Check that the black line aligns with the color line to be adjusted
at the X and Y positions of the test pattern.
% Press [+] or [-] to adjust the color line to be corrected while checking the sample.
The color registration is adjusted.
7
Press the [Start] key to print a test pattern, and then check the print result.
8
Press [OK].
d-Color MF651/551/451
7
7-23