Stamp Settings - Olivetti d-Color MF451 Instructions Manual

7
Factory default
Original Glass Original Size
Detect
8-1/2 e 14 Foolscap Size
Detection
Foolscap Size Setting
7.1.12

Stamp Settings

Configure header and footer settings to be printed.
%
Press the [Utility/Counter] key ö [Administrator Settings] ö [System Settings] ö [Stamp Settings].
Settings
Header/Footer Settings
Fax TX Settings
Factory default
FAX TX Settings
7-28
Table 1
8-1/2 e 14
8 e 13 w
Register or change a header and footer.
To use the header/footer function in Application Setting, a header and foot-
er must be registered in advance.
New Enter a registration name, and then configure de-
tailed header and footer settings.
Configure whether to print a header and footer,
and then configure print contents.
•
•
•
Configure pages and text details.
•
•
Delete Deletes the selected header or footer.
Check/Edit Change the selected header or footer.
This setting is for the fax and network fax operations.
For details, refer to the "User's Guide [Network Scan/Fax/Network Fax Op-
erations]".
Cancel
System Settings
Text: Enter text.
Date/Time: Select a format to display the date
and time.
Other: Specify the distribution control
number. Select whether to include the Job
Number, Serial Number, and Account/User
Name.
Pages: Select whether to print the header and
footer on all pages or only on the first page.
Text Details: Select the color, size, and type of
the text for the header and footer to be print-
ed.
d-Color MF651/551/451
7.1