[Memory Rx Setting]; [Closed Network Rx]; [Forward Tx Setting] - Olivetti d-COLOR MF652 User Manual

11

[Memory RX Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Memory RX Setting]
Configure the settings for using the Memory RX function.
Memory RX is a function to save a received fax to Memory RX User Box of this machine.
Settings
[Memory RX User Box
Password]

[Closed Network RX]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Closed Network RX]
Configure the settings for using the Closed Network RX function.
Closed Network RX is a function that restricts fax senders by passwords. You can use this function only when
the remote machine is one of our models that has the Password TX function.
Settings
[Closed Network RX Pass-
word]

[Forward TX Setting]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Forward TX Setting]
Configure the settings for using the Forward TX function.
Forward TX transfers a received fax to a pre-specified destination.
Settings
[Yes]/[No]
[Output Method]
[Forward Dest.]
[Select Line]
11-24
Description
To use the Memory RX function, tap [No] to deselect it. In addition, specify
the password to restrict an access to the Memory RX User Box with up to
eight digits.
[OFF] is specified by default.
Description
To use the Closed Network RX function, tap [No] to deselect it. Also, enter
the password for limiting communications peers (a number containing up
to four digits).
Inform the receiver of the password you entered here.
[OFF] is specified by default.
Description
Select whether to use the Forward TX function.
[No] is specified by default.
Select whether to print a received fax on this machine when forwarding it.
• [Forward & Print]: A received fax is forwarded and printed on this ma-
chine.
• [Forward & Print (If TX Fails)]: A received fax is printed on this machine
if forwarding fails.
Specify a forwarding destination for a received fax.
Directly enter the appropriate fax number using the Keypad or tap [Select
from Address Book] and select one of the destinations registered on this
machine.
You can specify [File Type] and convert a fax into a file except when the
destination is a fax.
If two lines are used, select the line used to send a fax. If [No Selection] is
selected, either line, whichever is not busy, is used for transmission.
[No Selection] is selected by default.
d-Color MF752/652