[F-Code Tx]; [Relay Rx]; [Relay Printing]; [Destination Check Display Function] - Olivetti d-COLOR MF652 User Manual

11

[F-Code TX]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
- [F-Code TX]
Select whether to use the F-Code TX function.
F-Code TX is a function that sends documents to a destination by entering a SUB address and a sender ID
(communication password) of a specific user box. The remote machine must support the F-Code TX/RX. Fax-
ing is possible without specifying a sender ID (communication password). This setting is used for Confidential
Communication, Relay Distribution, or PC-Fax RX.
[ON] is selected by default.

[Relay RX]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
- [Relay RX]
Select whether to use this machine as a fax relaying station.
If this machine is used as a relaying station, it is possible to receive a fax from a remote machine and auto-
matically relay it to multiple programmed destinations.
[ON] is selected by default.

[Relay Printing]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
- [Relay Printing]
Select whether to distribute and print a received fax when this machine is used as a fax relaying station.
[OFF] is specified by default.

[Destination Check Display Function]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
- [Destination Check Display Function]
Select whether to show a list of specified destinations before sending a fax.
Select [ON] if you want to check destinations before sending a fax. Using this function helps to prevent in-
correct transmission and failure to send faxes.
[OFF] is specified by default.

[Confirm Address (TX)]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
- [Confirm Address (TX)]
Select whether to require the user to enter a fax number twice to send a fax by directly entering the fax
number.
This is helpful to prevent a fax from being sent to the wrong destination.
[OFF] is specified by default.

[Confirm Address (Register)]

To display: [Utility] - [Administrator Settings] - [Fax Settings] - [Function Settings] - [Function ON/OFF Setting]
- [Confirm Address (Register)]
Select whether to require the user enter a fax number twice to register it when, for example, registering a des-
tination or forwarding destination.
This is helpful to prevent the fax number from being incorrectly registered.
[OFF] is specified by default.
d-Color MF752/652 11-23