[Function Display Key(Send/Save)]; [Fax Active Screen]; [Search Option Settings] - Olivetti d-COLOR MF652 User Manual

[Function Display Key(Send/Save)]

To display: [Utility] - [User Settings] - [Custom Display Settings] - [Function Display Key(Send/Save)]
Change the function key to be displayed in the main screen in the fax/scan mode and the send and save set-
ting screens in the User Box mode.
Select a function key number, and specify the function to assign.
The following shows the default functions.
- [Function Key 1]: [Simplex/Duplex]
- [Function Key 2]: [Resolution]
- [Function Key 3]: [Color]
- [Function Key 4]: [File Type]
- [Function Key 5]: [Scan Size]
- [Function Key 6]: [E-mail Settings]
- [Function Key 7]: [OFF]
Tips
- The above functions can be configured when you are allowed to change a function key by the admin-
istrator.

[FAX Active Screen]

To display: [Utility] - [User Settings] - [Custom Display Settings] - [FAX Active Screen]
Select whether to display the screen indicating the machine status during fax transmission.
Settings
[TX Display]
[RX Display]

[Search Option Settings]

To display: [Utility] - [User Settings] - [Custom Display Settings] - [Search Option Settings]
Configure the contents of the search screen when performing an detail search for registered destinations.
Settings
[Uppercase and Lower-
case Letters]
[Search Option Screen]
d-Color MF752/652
Description
Select whether to display a screen indicating a fax being sent.
You can check information on a destination and document in this screen.
[No] is specified by default.
Select whether to display a screen indicating a fax being received.
You can check information on sender and fax being received in this screen.
[No] is specified by default.
Description
Select whether to distinguish between upper and lower case alphabet
characters when searching for a registered destination.
[Differentiate] is specified by default.
If you want to change the setting of [Upppercase and Lowercase Letters]
when searching for a destination, select [ON].
If you select [ON], the check box for switching the setting is displayed in
the [Name Search] and [Address Search] screen respectively.
[OFF] is specified by default.
10
10-9