Toshiba SD-W1101 Hardware Instruction Manual page 14

Daisy-Chaining - If the DVD-RAM you are installing is one of two
or more SCSI devices you have connected to your system, you will
need to use a custom built SCSI interface cable. Remember that the
terminator jumper on the DVD-RAM drive must have the jumper in-
stalled when the drive is the last device in the chain.
Host Computer
I/F Card
Terminator
Host Computer
I/F Card
Terminator
DVD-RAM DAISY-CHAIN CONNECTION
Notes:
1. Terminator jumper must be jumpered when DVD-RAM is the last
or only device on the SCSI BUS.
2. Terminator jumper should be removed when DVD is in a "daisy-chain"
and is NOT the last drive.
10
TOSHIBA SD-W1101/W1111 DVD-RAM Drive
SCSI Cable
DVD-RAM CONNECTION (ONE DRIVE)
SCSI Cable
If connecting more
than three SCSI
devices, you need to
use a custom built
SCSI Interface Cable.
DVD-RAM/SCSI DEVICE
INTERNAL DRIVE(S)
Interface Connector
SCSI
DEVICE
#1
(see note 2)
SCSI
DEVICE
#2
(see note 2)
SCSI
DEVICE
#N
(N < 7)
Install Terminator Jumper
only on the last drive of BUS
(see note 1)
(MULTIPLE DRIVES)
Interface
Connector
DVD-RAM
DRIVE
(see note 1)