Andiron Installation - Travis Industries 864 HO Installation Manual

52 Optional Equipment

Andiron Installation

The optional andirons should be installed prior to installing the logs. See the directions below for
installation.
1 Remove the grate from the
firebox. Remove and discard
the two andiron prongs (see
step "a" to the right).
NOTE: The nuts do not need to
be removed, they can be
loosened to remove the prongs.
2 Attach the andiron brackets
(shipped with the fireplace) to
the grate (see step "b").
3 Attach the andirons the the
andiron brackets using the
screws included with the
andirons (see step "c").
© Travis Industries
(for qualified installers only)
a
b
c
4100728
11/32" Nutdriver
5/32 Hex
Wrench
100-01254_000