Table of Contents
Advertisement
Optional Equipment
Andiron Installation
Install the andirons after installing all other optional equipment (firebacks, accent light, etc) but before
installing the logs.
Part Numbers: Arabesque 98500633 -- Colonial 98500631 -- Wrought Iron 98500632
a
Disassemble one of the andiron
brackets.
© Travis Industries
(for qualified installers only)
5/32" Hex
Wrench
4121105
b
Lift up on the
burner and slide
the upper portion
of the bracket into
the gap between
the burner and
grate.
c
Attach the andiron to the
d
lower portion of the
bracket with the included
screw (use the included
5/32" hex wrench).
Attach the andiron (with
e
bracket) to the bracket on
the fireplace using the
screws removed in step "a".
You may need to bend the
bracket slightly to allow the
andirons to stand vertically.
Repeat steps "a" through "e"
f
for the opposite side.
59
Pull on the
bracket so it
is all the way
forward.
100-01303
Advertisement
Table of Contents
