Panasonic KX-TDE100 Installation Manual page 274

Pure ip-pbx
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

5.1.1 Installation
PROBLEM
The LINK indicator of the
IP-EXT/IP-GW/IPCMPR
does not turn on.
274
Installation Manual
PROBABLE CAUSE
IP-EXT/IP-GW card
malfunction
IPCMPR card
malfunction
Poor connection.
Network malfunction
SOLUTION
Replace the corresponding card.
Replace the IPCMPR card (be sure to turn
off the PBX when replacing).
Make sure that an 8-pin twisted pair cable
is used for connection.
Make sure that none of the CAT 5 cables in
use are over 100 m in length.
Make sure that a straight cable is used for
connection to a switching hub.
Make sure that all network devices in use
are switched on.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pure ip-pbxKx-tde200Tde100Tde200

Table of Contents