Panasonic KX-TDE100 Installation Manual page 189

Pure ip-pbx
Hide thumbs Also See for KX-TDE100:
Table of Contents

Advertisement

Mounting the KX-TDA0141CE/KX-TDA0142CE
WARNING
Make sure that the wall that the unit will be attached to is strong enough to support the unit
(approx. 310 g). If not, it is necessary for the wall to be reinforced.
Only use the wall-mounting equipment (screws, washers) included with the unit.
When driving the screws into the wall, be careful to avoid touching any metal laths, wire laths
or metal plates in the wall.
When this product is no longer in use, make sure to detach it from the wall.
CAUTION
Do not stretch or bend the cables. Also, do not allow anything to rest on the cables.
Use cables that are fire-resistant or fireproof.
The CS and the cables should never be placed near or over a radiator or other heat source.
Do not bundle cables that are connected to the CS with the AC power cords of machines located
nearby.
Make sure the cables are securely fastened to the wall.
1.
Place the reference for wall mounting (KX-TDA0141CE/KX-TDA0142CE) on the wall to mark the 2 screw
positions.
2.
Install the 2 screws and washers (included) into the wall.
Note
Make sure that the screw heads are at the same distance from the wall.
Install the screws perpendicular to the wall.
3.
Hook the CS on the screw heads.
Washer
Drive the screw
to this point.
3.9.8 Wall Mounting
Installation Manual
189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pure ip-pbxKx-tde200Tde100Tde200

Table of Contents