Panasonic KX-TDE100 Installation Manual page 201

4.
After setting the DIP switches, connect the CS to an AC adaptor/battery box using a power supply adaptor.
WARNING
The AC adaptor should be connected to a vertically oriented or floor-mounted AC outlet. Do not
connect the AC adaptor to a ceiling-mounted AC outlet, as the weight of the adaptor may cause
it to become disconnected.
Notice
If the Power Supply Select switch is set to ON in step 3, connect the CS to an AC adaptor/battery box.
If it is set to OFF, connect the CS to a CSIF/DLC/DHLC card (KX-TDA0151/KX-TDA0152 only).
KX-TDA0151/KX-TDA0152
Modular
Telephone Cord
Power Supply Adaptor
(PSZZ1TDA0142)
To AC Adaptor (KX-A11/KX-TCA1)/
Battery Box (PSZZTD142CE)
Modular
To CSIF/DLC/DHLC card
*1 KX-TDA0151CN: Battery Box (PSZZTD142CE) only. The AC Adaptor is not available.
KX-TDA0141/KX-TDA0142
To AC Adaptor (KX-A11/KX-TCA1)/
1
*
Battery Box (PSZZTD142CE)
Modular
Telephone Cord
Power Supply Adaptor
(PSZZ1TDA0142)
3.10.4 Before Site Survey
Installation Manual 201