Panasonic KX-TDE100 Installation Manual page 235

Error Rate
Approx. 2%
Approx. 10%
The above is a rough standard, and may vary depending on the environment.
•
When deciding where to install the CS, priority should be given to an error rate rather than a radio
signal strength level.
•
After installing the CS according to the results of the survey, confirm that calls can be made and
received, and conversations can be heard clearly.
a.
Move to the CS until the radio signal strength level becomes "12".
b.
Move away from the CS and identify the CS coverage area within which the radio signal strength level
is greater than "8". Draw the area on the map.
c.
Move away from the CS and identify the CS coverage area within which the radio signal strength level
is greater than "3". Draw the area on the map.
Channel no. 0
Radio Signal Strength Levels
Level: 11 to 12
Level: 08 to 10
Level: 03 to 07
Level: 01 to 02
Level: 00
May receive noise
May fail to make/receive calls
CH0
PS
L:12
CH0
PS
L:08
PS
Better
Good
May receive noise
Receives noise easily or disconnects
Out of range
Description
CH0
L:03
3.11.5 Site Survey
Installation Manual 235