Selecting The Remote Control Id (Remote Id); Changing The Fm/Am Tuning Frequency Setting (Tu); Switching The Video Signal Type (Tv Format); Restoring The Default Settings (Init) - Yamaha RX-V577 Owner's Manual

Selecting the remote control ID (REMOTE ID)

CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
REMOTE ID••ID1 ADAPTIVE DRC
Change the unit's remote control ID so that it matches the remote control's ID (default:
ID1). When using multiple Yamaha AV receivers, you can set each remote control with a
unique remote control ID for its corresponding receiver.
Settings
ID1, ID2
■
Changing the remote control ID of the remote control
1
To select ID1, while holding down the cursor key (e), hold down SCENE (BD/DVD)
for more than 3 seconds.
To select ID2, while holding down the cursor key (e), hold down SCENE (TV) for
more than 3 seconds.
• Once the remote control ID is selected successfully, TRANSMIT indicator blinks twice. If it blinks six times,
selecting has failed.

Changing the FM/AM tuning frequency setting (TU)

(Asia and General models only)
CHARGE ENHANCER STEREO TUNED SLEEP MUTE
OUT VOL.
ECO
TU••••FM50/AM9 ADAPTIVE DRC
Change the FM/AM tuning frequency setting of the unit depending on your country or
region.
Settings
Select this when you want to adjust the FM frequency by 100-kHz
FM100/AM10
steps and AM by 10-kHz steps.
Select this when you want to adjust the FM frequency by 50-kHz steps
FM50/AM9
and AM by 9-kHz steps.
VIRTUAL
VIRTUAL

Switching the video signal type (TV FORMAT)

CHARGE ENHANCER STEREO TUNED
OUT
ECO
TV FORMAT•NTSC
Switch the video signal type of HDMI output so that it matches to the format of your TV.
Since the unit automatically selects the video signal type so that it matches to the TV, it
is unnecessary to change the setting normally. Change the setting only when images
on the TV screen do not appear correctly.
Settings
NTSC, PAL
Default
U.S.A., Canada, Korea and General models: NTSC
Other models: PAL

Restoring the default settings (INIT)

CHARGE ENHANCER STEREO TUNED
OUT
ECO
INIT••••CANCEL
Restores the default settings for the unit.
Choices
ALL Restores the default settings for the unit.
CANCEL Does not perform an initialization.
CONFIGURATIONS ➤ Configuring the system settings (ADVANCED SETUP menu)
SLEEP MUTE
VOL.
VIRTUAL
ADAPTIVE DRC
SLEEP MUTE
VOL.
VIRTUAL
ADAPTIVE DRC
95
En