Connecting Speakers; 5.1-Channel System - Yamaha RX-V577 Owner's Manual

1 2 3 4 5 6 7 8 9 10 11
2

Connecting speakers

Connect the speakers placed in your room to the unit.
The following diagrams provide connections for 5.1-
and 7.1-channel systems as examples. For other
systems, connect speakers while referring to the
connection diagram for the 5.1-channel system.
Caution
• Remove the unit's power cable from an AC wall outlet and turn
off the subwoofer before connecting the speakers.
• Ensure that the core wires of the speaker cable do not touch
one another or come into contact with the unit's metal parts.
Doing so may damage the unit or the speakers. If the speaker
cables short circuit, "Check SP Wires" will appear on the front
display when the unit is turned on.
Cables required for connection
(commercially available)
Speaker cables (x the number of speakers)
+ +
– –
Audio pin cable (x1: for connecting a subwoofer)

5.1-channel system

The unit (rear)
DC OUT SPEAKERS
P 5V 0.5A
B
FRONT CENTER SURROUND
Y
OR OUT
1
2
SUBWOOFER
PRE OUT
1 2
9 3
4
• (RX-V577 only)
You can connect 2 subwoofers (with built-in amplifier) to the unit.
The 2 subwoofers output the same sound.
7.1-channel system
(RX-V577 only)
The unit (rear)
DC OUT
SURROUND BACK/BI AMP
P 5V 0.5A
/ZONE B B
SINGLE
Y
OR OUT
1
2
SUBWOOFER
PRE OUT
9
5 4
6
• When using only one surround back speaker, connect it to the
SINGLE jack (L side).
PREPARATIONS ➤ Connecting speakers
SPEAKERS
SURROUND BACK/BI AMP
/ZONE B
FRONT CENTER SURROUND
SINGLE
1 2
3 9
5
7
16
En