Network - Yamaha RX-V577 Owner's Manual

Network

Configures the network settings.
• Default settings are underlined.
■
Information
Displays the network information on the unit.
Status The connection status of the NETWORK jack
Connection * Connection method
SSID * The access point to which the unit is connected
Security * The encryption method for your network
MAC Address MAC address
IP Address IP address
Subnet Mask Subnet mask
Default Gateway The IP address of the default gateway
DNS Server (P) The IP address of the primary DNS server
DNS Server (S) The IP address of the secondary DNS server
vTuner ID The ID of the Internet radio (vTuner)
* RX-V577 only
■
Network Connection
(RX-V577 only)
Selects the network connection method.
Choices
Select this option when you want to connect the unit to a network with
Wired
a commercially-available network cable.
Select this option when you want to connect the unit to a network via
Wireless (Wi-Fi) the wireless router (access point). For details on settings, see
"Connecting the unit to a wireless network" (p.30).
Select this option when you want to connect a mobile device to the
Wireless Direct unit directly. For details on settings, see "Connecting a mobile device
to the unit directly (Wireless Direct)" (p.36).
■
IP Address
Configures the network parameters (such as IP address).
DHCP
Select whether to use a DHCP server.
Settings
Does not use a DHCP server. Configure the network parameters
Off
manually. For details, see "Manual network settings".
Uses a DHCP server to automatically obtain the unit's network
On
parameters (such as IP address).
■
Manual network settings
1
Set "DHCP" to "Off".
2
Use the cursor keys (q/w) to select a parameter type.
IP Address Specifies an IP address.
Subnet Mask Specifies a subnet mask.
Default Gateway Specifies the IP address of the default gateway.
DNS Server (P) Specifies the IP address of the primary DNS server.
DNS Server (S) Specifies the IP address of the secondary DNS server.
3
Use the cursor keys (e/r) to move the edit position and the cursor keys
(q/w) to select a value.
4
To exit from the menu, press SETUP.
CONFIGURATIONS ➤ Configuring various functions (Setup menu)
91
En