Software Documentation Updates - Fujitsu SPARC Enterprise M4000 Product Notes

Software Documentation Updates

This section contains late-breaking software information that became known after
the documentation set was published and corrections in the SPARC Enterprise
M4000/M5000 servers software documentation.
The corrections for SPARC Enterprise M3000/M4000/M5000/M8000/M9000 Servers
XSCF Reference Manual, if not otherwise specified, also apply to the man pages which
XSCF provides. And they supersede the information on the man pages.
TABLE 13
Software Documentation Updates
TABLE 13
Title
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers
XSCF Reference Manual
lists known documentation updates.
Page Number Update
The setad(8), setldapssl(8), showad(8), and the
showldapssl(8) will be added. See the setad(8),
setldapssl(8), showad(8), and the showldapssl(8)
commands man pages.
The maximum values of several options will be changed like as
password(8)
and follows:
setpasswordp
Example) password -i: Valid values are integers with value of
olicy(8)
-1 - 999999999.
commands
The following description will be added in DESCRIPTION:
setdualpower
feed(8)
The dual power feed mode cannot be used with 100V power on
command
the M4000/M5000 servers.
The following description will be added in EXTENDED
sethttps(8)
command DESCRIPTION:
The size of the file to be generated by sethttps(8) grows with
total character count typed in the operands of configuring the
self-certification authority and creating a self-signed web server
certificate, and creating a CSR. If the file to be generated is too
large for XSCF, the command fails with an error. If you see this
error, reduce the number of characters in the operands and
execute the sethttps(8) command again.
Information About Software 53