Software Documentation Updates - Fujitsu SPARC M4000 Product Notes

Software Documentation Updates

This section contains late-breaking software information that became known after
the documentation set was published and corrections in the SPARC Enterprise
M4000/M5000 servers software documentation.
The corrections for SPARC Enterprise M4000/M5000/M8000/M9000 servers XSCF
Reference Manual, if not otherwise specified, also apply to the man pages which
XSCF provides. And they supersede the information on the man pages.
TABLE 8
Documentation Updates
TABLE 8
Title
All SPARC Enterprise
M4000/M5000 servers
documentation
SPARC Enterprise
M4000/M5000/M8000/
M9000 Servers XSCF
Reference Manual
34 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1060 • February 2008
lists known documentation updates.
Page Number Update
All DVD references are now referred to as CD-RW/DVD-RW.
The following description is added in EXTENDED
setpowerupde
lay(8) man DESCRIPTION:
page
When the power is turned on from the operator panel, the wait
time and warm-up time that you set are ignored. If you have
set these times and wish to observe them at startup, perform the
poweron(8) command.
The -p user option requires useradm privileges.
setupplatfor
m(8) man page
The -p network option requires platadm privileges.
The -p altitude option requires platadm privileges.
The -p timezone option requires platadm privileges.