Information About Hardware; Notes On Server Installation; Notes On Dvd Drives And Discs - Fujitsu SPARC Enterprise M4000 Product Notes

Information About Hardware

This section describes the special instructions and the issues about the SPARC
Enterprise M4000/M5000 servers hardware.
"Notes on Server Installation" on page 13
■
"Notes on DVD Drives and Discs" on page 13
■
"Notes on the Use of USB Memory" on page 14
■
"Power Control and Operator Panel Mode Switch" on page 14
■
"Hardware Issues and Workarounds" on page 15
■
"Hardware Documentation Updates" on page 15
■

Notes on Server Installation

The plug (NEMA L6-20) of the power cables supplied with the SPARC Enterprise
M4000/M5000 servers has the following dimensions.
Confirm in advance that the plug does not become an obstruction when plugged
into the input power source at the installation site.
Outside diameter of the connector part of the plug: 50 mm
■
Maximum outside diameter of the plug cover: 57 mm
■
Plug cover length from the connector end: 69.9 mm
■

Notes on DVD Drives and Discs

See the "Notes on DVD Drives and Discs in SPARC Enterprise" on the website below
before using the CD/DVD discs in the standard DVD drive mounted in this server.
Information About Hardware 13