Fujitsu SPARC Enterprise M4000 Product Notes page 36

XCP Issues Fixed in Releases Earlier Than XCP 1091 (Continued)
TABLE 6
ID Description
RTIF1- On the XSCF Web, on the SNMPv3 Security
070914-010 Settings screen, when you select Add User or
Copy User of the SNMP User-Based Security
Model (USM), the Create or Copy User screen
appears as a pop-up. On this screen, when you
set the SNMP User with 16 digits or more, it
will be registered correctly but the web
browser screen displays up to 15 digits.
RTIF1- On the XSCF Web, on the SNMPv3 Security
070914-011 Settings screen, when you select Change
Password of the SNMP User-Based Security
Model (USM), the Change Password screen
appears as a pop-up. On this screen, despite
the "Confirm Password" is a field which must
be entered, it is not displayed with the note "*
Indicates require field."
RTIF1- On the XSCF Web, on the SNMP-Properties
070914-012 screen, when you don't select Trap Host and
execute the Remove button, the invalid
message "The trap host will be
removed" appears as a pop-up. And when you
select OK on the pop-up screen, the invalid
message "Remove trap host failed.
setsnmp: invalid trap type" appears.
RTIF1- On the XSCF Web, on the Audit-Properties
070914-013 screen, when you execute the Add Policy
button, the Set User Policy appears as a pop-
up. On this screen, when you specified a user
name which is not registered in XSCF and an
input error resulted, the value entered won't
be cleared though you execute the Reset
button to clear the specified user name.
RTIF1- On the XSCF Web, when you use a user
070914-014 account without an appropriate privilege to
select Snapshot, set the parameters of Start
time or End time and execute the Download
button, it doesn't result in a privilege error but
the parameter error will be displayed.
RTIF1- On the XSCF Web, when you select User
070914-015 Manager to add the user account, the user
name to be specified is limited up to 20
characters.
26 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1091 • April 2010
Workaround
When you set the SNMP User with 16 digits or
more, use the showsnmpusm(8) command.
Do not fail to set Confirm Password which is a
field must be entered.
None available at this time.
Set the correct user name or execute the Cancel
button to close the pop-up screen.
None available at this time.
To specify a user name of 20 characters or
more, use the adduser(8) command.