Fujitsu SPARC Enterprise M4000 Product Notes page 64

Software Documentation Updates (Continued)
TABLE 13
Title
SPARC Enterprise
M3000/M4000/M5000/
M8000/M9000 Servers
XSCF Reference Manual
54 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1091 • April 2010
Page Number Update
• The following description will be added in OPERANDS:
setnameserve
r(8) command You cannot specify the loopback address (127.0.0.0/8), the
network address, or a broadcast address.
• The following options for specifying a domain being referred
to DNS server will be added:
-c addsearch
-c delsearch
• Along with the addition of DNS search path, related
descritpion for DNS search path will be added in the
applynetwork(8), sethostname(8), and
shownameserver(8) commands. For details, see the the
setnameserver(8), applynetwork(8), sethostname(8),
and shownameserver(8) man pages.
The following description will be added in OPERANDS:
setnetwork(8)
command
You cannot specify the loopback address (127.0.0.0/8), the
network address, a broadcast address, or class D or E (224.0.0.0
- 255.255.255.255) address.
• The following description will be added in OPERANDS:
setntp(8)
command You cannot specify the loopback address (127.0.0.0/8), the
network address, or a broadcast address.
• The following options for setting the local clock of XSCF will
be added:
-m localaddr=value
• Along with the addition of clock address, related descritpion
for local addresses will be added in the showntp(8)
command. For details, see the the setntp(8) and showntp(8)
man pages.
• The following description will be added in OPTIONS:
setroute(8)
command You cannot specify the loopback address (127.0.0.0/8), the
network address, or a broadcast address.
• The description, " If you specified 0.0.0.0 in the -n option, do
not specify the -m option." in OPTIONS will be changed to
the following description:
If you specified 0.0.0.0 in the -n option, you must specify
0.0.0.0 in the -m option or you must omit the -m option.
The following description will be added in EXTENDED
setupfru(8)
command DESCRIPTION:
Although a CMU with two CPUMs can be configured into
Quad-XSB mode on an M8000/M9000 server, the server
generates a "configuration error" message for these XSBs
that do not have a CPUM and memory.