Fujitsu SPARC Enterprise M4000 Product Notes page 37

XCP Issues Fixed in Releases Earlier Than XCP 1091 (Continued)
TABLE 6
ID Description
RTIF1- On the XSCF Web, when you select LDAP to
070914-016 perform the LDAP configuration, if you
execute Save while the LDAP Search Timeout
remains as its default value "0," it results in
"LDAP Configuration Update Failed.
Save LDAP Configuration Data
failed," and the setting can't be stored.
RTIF1- On the XSCF Web, when you select LDAP and
070914-017 input the LDAP Search Timeout with a value
which exceeds the maximum 2147483647
seconds, it doesn't result in parameter error.
RTIF1- On the XSCF Web, when you use a user
070914-018 account without an appropriate privilege to
select LDAP and execute the Delete button, it
results in a privilege error but the
configuration information which has been
displayed will be cleared and seems as if
deleted.
RTIF1- The CLI 'showldap -c' (which displays
070914-019 current LDAP certificates) will show proper
data only when used with the same user
account that had originally provided certificate
information using 'setldap -c'. Any other
user account will generate "Permission
denied" error. Similarly, the XSCF Web's
LDAP Configuration pop-up screen will
display no data, when a different user account
is used.
RTIF1- On the User Account setting page on the User
070914-020 Manager screen, after the password change
resulted in "Change Password Error,"
when you click on the REFRESH button, there
appears the error message "No user. The
request is aborted."
RTIF1- During the OpenBoot PROM process, when
070914-021 you power off the domain, the error log of
Domain hang-up detected (level3)
may be registered.
RTIF1- When you specify the domain ID or XSB
070914-023 number which are not supported on the
machine, there appears the parameter error
message.
Workaround
Since "0" is an invalid value in the LDAP
Search Timeout, do not fail to set a value other
than 0.
None available at this time. The maximum
2147483647 seconds will be set to the LDAP
Search Timeout.
The configuration is not deleted. To show the
configuration information again, select LDAP
from the Menu.
Use the same user account for all LDAP
display or configuration operations, for both
CLI and XSCF Web.
To change the password, select User Manager
on the Menu again.
This error log can be safely ignored.
To specify the available domain ID or XSB
number on the machine.
Information About Software 27