Fujitsu SPARC Enterprise M4000 Product Notes page 61

Hide thumbs Also See for SPARC Enterprise M4000:
Table of Contents

Advertisement

Solaris OS Issues Fixed in Solaris 10 8/07 (Continued)
TABLE 12
CR ID
Description
6520990
Domain may cause a panic when
deleteboard(8) command for kernel board
by using Dynamic Reconfiguration (DR).
6530178
DR addboard(8) command can hang. Once
problem is observed, further DR operations are
blocked. Recovery requires reboot of the
domain.
6530288
Ap_Id format may not be shown correctly by
cfgadm(1M) command.
6534471
Systems may panic/trap during normal
operation.
6535564
PCI hot plug to PCI slot #0, #1 or External I/O
Expansion Unit may fail on XSB added by DR.
6539084
Under Solaris 10 11/06, there is a low
probability of a domain panic during reboot
when the Sun Quad GbE UTP x8 PCIe
(X4447A-Z) card is present in a domain.
Workaround
For Solaris 10 11/06, this has been fixed in
patch 120011-08.
[Workaround]
To mask this error, add the following entry to
the /etc/system file.
set drmach:fmem_timeout = 30
For Solaris 10 11/06, this has been fixed in
patch 120011-07.
No workaround is available.
For Solaris 10 11/06, this has been fixed in
patch 120011-07.
No workaround is available.
For Solaris 10 11/06, this has been fixed in
patch 125100-06.
If a patch is not available, disable the kernel
large page sTLB programming. In the file
/etc/system, change the variable
heaplp_use_stlb to 0:
set heaplp_use_stlb=0
For Solaris 10 11/06, this has been fixed in
patch 120011-08.
[Workaround]
Use DR instead of PCI hot plug if need to add
or remove PCI card on the XSB.
No workaround is available.
Information About Software
51

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sparc enterprise m5000

Table of Contents