3.2.1 Motion Level
3.2.2 Motion Grid
Use – or + button to adjust the motion sensitivity level. The
necessary sensitivity can be immediately determined by
looking into the grids and observing the green tracking of
the movement. Sensitivity level 1 is the lowest setting and
level 20 is the highest setting. The default sensitivity level
is 10.
Activate or deactivate each grid by pressing the appropriate
numeric button. All the grids are active by default, and are
highlighted in blue tint. If deactivated, then the tint will be
removed. Small grids can be controlled on CMS software.
Please refer to DVR SETUP section that will be discussed
later in the manual.
Press the – or + button after highlighting the PENCIL icon
to activate all grids at the same time.
Press – or + button after highlighting the ERASER icon to
deactivate all grids at the same time.
58
DV 3 SERIES DVR