Dvr Set List Manager - Nuvico NVDV3-4000 Instruction Manual

17. DVR SET LIST MANAGER

Set List Manager is used to add or remove individual DVRs.
①
Set Name
The set name can be manually entered for an easier identification of an individual DVR. The DVR Host
Name is entered automatically with Auto Scan.
②
IP
Enter the IP address or the host address of the DVR. The IP address is entered automatically with Auto
Scan.
③
Port
The default port for CMS is 7000. The port is entered automatically with Auto Scan.
④
Administrator's Password
Enter the administrator's password to access the DVR. The password is entered as "000000" with Auto
Scan.
⑤
Apply
When editing a DVR, click on Apply to put the new settings in effect. Please note that the DVR set needs
to be highlighted.
⑥
Auto Scan
Auto Scan scans for any DVRs connected within the Local Area Network. As it adds DVRs automatically,
it will ignore DVRs already on the list. By default, Auto Scan will enter the Set Name, IP address, Port,
and the password with the default DVR settings.
⑦
Add To List
When a DVR is entered manually, click on Add To List after entering all the values.
⑧
Del From List
When a DVR needs to be removed from the list, highlight the DVR to be removed, and then click on Del
From List.
①
②
③
④
⑥ ⑦
⑤
⑧ ⑨
96
⑩
DV 3 SERIES DVR