Motion Recording - Nuvico NVDV3-4000 Instruction Manual

4.2 MOTION RECORDING

Please verify that the motion option has been enabled under RECORD SETUP menu. Also, verify that
the settings for motion grids, motion sensitivity level and record time have been configured under the
MOTION SETUP menu.
deactivated, the motion grid setting may be ignored.
The motion grids are all activated by default, thus, unless it has been
Press the record button and the record icon will appear as
shown on the left. The DVR will be on record standby
mode until motion is triggered. The DVR does not record
as log as there is no motion.
Motion recording icon will appear on the channel motion
was detected. The channel number will turn yellow as it
starts to record. The illustration to the left shows channel 1
and 2 in motion recording mode.
recording will be based on the RECORD TIME setting
under MOTION setup.
41
The duration of the
DV 3 SERIES DVR