Additional Remote Control - TANDBERG 8000 MXP User Manual

TANDBERG 8000 MXP

6.6 Additional Remote Control

The remote control (TRC 4) can be ordered separately.
The system is controlled with a remote control. Think of the remote control as a mobile phone
with number keys and call keys. Use the arrow keys and press OK to navigate through the
menus. The system's most commonly used functions are also accessible directly from the remote
control.
242
1. Change video source. If
possible, you will start open a
Dual Stream. Press the video
source button again to stop
the dual stream.
2. Mic Off turns your microphone
on and off, see Mic
3. Arrow keys are used for
navigation in the menu and for
moving the camera* when the
menu is hidden, see
Navigation.
4. Volume + and – adjusts the
Codec volume only and not
the monitor's volume, see
Volume + and -.
5. The Layout key toggles
between full screen and
different display layouts, see
Layout.
6. Cancel takes you back one
step in the menu system. Use
Cancel to delete characters in
an input field, see Navigation.
Press and hold the Cancel
key for 1 second to close the
menu.
7. Press the Call key to place a
call, see Make a Call.
8. Number/Letter keys function
in the same manner as with a
mobile or cellular phone, see
Number and Letter
Camera presets define
specific camera positions.
Move the camera to the
desired position and press
and hold a number key for 1
second to save the current
camera position to that
number key. To activate a
off.
keys.