TANDBERG 8000 MXP User Manual page 256

Peripheral Equipment
preset whilst in a call, simply
press and release that
number key, see Camera
Presets.
9. Press Preset + a number to
activate a preset.
10. Press the Services button to
open the Services menu.
11. The Presentation key
switches to a predefined
presentation source. If the
Presentation key is held down
for 1 second then the
Presentation video sources
menu will appear, see
Presentation Key.
12. Press OK/Menu to show the
menu and to select menu
items, see Navigation.
13. Use Zoom + and – to zoom
the camera in and out.*
14. Selfview displays your
outgoing video. Press
Selfview again to turn selfview
off, see Selfview.
15. Use the Phone Book to store
and recall video contacts for
easy placement of calls, see
Phone Book.
16. Use the red End Call key to
end the current call. Pressing
this key when not in a call will
place the system in Standby
mode, see End Call
Standby.
17. Snapshot takes a snapshot of
your video only while you are
in a call, see Take New
Snapshot.
18. Press Touch tones when you
are in a call and need to dial
extension numbers etc.
(instead of presets). Press the
OK/Menu button to exit Touch
Tones, see Touch tones.
19. Pressing Far End turns Far
End control on and off.
20. Press the Help button to open
the User Guide menu.
and
243