TANDBERG 8000 MXP User Manual page 26

Introduction
TANDBERG Cameras at TANDBERG 8000 MXP
The system is delivered with TANDBERG Precision HD Camera as the main camera. The WAVE
II Camera is still available but will be used as additional camera on system with multiple cameras.
The system can have 1 Precision HD Camera plus up to 3 Wave Cameras.
Installing the Precision HD Camera on the TANDBERG 8000 MXP
Place the camera centrally on top of the monitor, in line with the front of the screen. The camera
should be aligned with the front edge of the monitor to ensure that the IR-sensor in the camera
can pick up signals from the remote control.
Installing the WAVE II Camera
Take the camera and remove the plastic backing from the double-sided pads on the base of the
unit. Place the camera centrally on top of the monitor, in line with the front of the screen. The
camera should be aligned with the front edge of the monitor to ensure that the IR-sensor in the
camera can pick up signals from the remote control.
13