Table of Contents
Advertisement
WARNING: DO NOT OPERATE THE FIRE-
PLACE FOR ANY EXTENDED PERIOD OF
TIME WITHOUT THE LAVA ROCK IN
PLACE. THE PAN CAN OVER HEAT AND
MAY WARP AND THE FIREPLACE MAY
SHUT OFF AUTOMATICALLY.
INSTALLING THE LOGS
After verifying that the fireplace operates prop-
erly, replace the cover and set the bottom
refractory components in place.
Use two (2) bags of lava rock to fill the bottom
of the burner tray to completely cover the
burner tube. Level the rock evenly.
Place the rear log approximately centered as
shown in Figure 14 .
Place the base log approximately as shown in
Figure 15 .
The remaining logs can be placed across the
rear and base log approximately as shown in
Figure 16 . The exact position of these logs
is not critical . Due to the nature of an
outdoor environment, the flame will never be
strictly controlled. You may need to reposi-
tion the logs to get the effect you find most
desirable.
A more detailed description is provided in the
Homeowners Care and Operations manual.
CAUTION: LOGS GET HOT WHILE THE FIRE-
PLACE IS IN OPERATION. DO NOT ATTEMPT
TO ADJUST OR MOVE THE LOGS WHILE THE
FIREPLACE IS HOT.
12
Rear Log
Figure 14
Base Log
Figure 15
Top Center Log
Top Left Log
Figure 16
NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.
Top Right Log
Hide quick links:
Advertisement
Table of Contents
