Arris Touchstone CM300 User Manual page 11

Safety Getting Started
Cable Modem Rear Panel
6
7 8 9
Home Prev Next
Installation USB Drivers
10 11
Usage Troubleshooting
Rear Panel
The rear of the Cable Modem has the following connectors and controls:
6 Standby button: press once to disconnect all PCs connected to the Cable
Modem from the network; press again to reconnect. The Online light shows
you the current standby state.
7 Power: plug the AC adapter in here.
8 USB connector: for connecting the Cable Modem directly to a PC.
9 Ethernet connector: for connecting the Cable Modem to a PC or home net-
work LAN.
10 Reset button: resets the Cable Modem as if you disconnected power. Use a
pointed non-metallic object to press this button.
11 Cable: plug the coax cable
Touchstone CM300 Cable Modem User's Guide
Specifications
in here.
Glossary
9