Setup Items - YASKAWA MP Manual

4

Setup Items

Set up the Display's communication settings in GP Pro-EX or in the Display's offline mode.
The setting of each parameter must match that of the External Device.

"3 Communication Settings" (page 13)
• Set the Display's IP address in offline mode.
Cf.
4.1 Setup Items in GP-Pro EX
 Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
Setup Items
Port No.
Timeout
Retry
Wait To Send
Increase Allowable
Number of Devices/
PLCs
• Refer to the GP-Pro EX Reference Manual for Indirect Device.
GP-Pro EX Device/PLC Connection Manual
Maintenance/Troubleshooting Guide "Ethernet Settings"
Enter a port number of the External Device, using 1024 to 65535. Check into [Auto], and a
port number is set automatically.
Use an integer from 1 to 127 to enter the time (s) for which Display waits for the response
from External Device.
In case of no response from the External Device, use an integer from 0 to 255 to enter how
many times the Display retransmits the command.
Use an integer from 0 to 255 to enter standby time (ms) for the Display from receiving
packets to transmitting next commands.
When clicked, the [Increase Allowable Number of Devices/PLCs] dialog box is displayed.
When you check [Increase allowable number of Devices/PLCs], the settings for
[Allowable Number of Devices/PLCs] can be extended to "64".
Cf. GP-Pro EX Reference Manual "Changing the Device/PLC at Runtime (Indirect
Device)"
MP/INVERTER/SERVO Ethernet Driver
Setup Description
80