System Configuration - YASKAWA MP Manual

1

System Configuration

The system configuration in the case when the External Device and the Display are connected is shown.
1.1 MP Series
Series CPU
MP2300
MP2200
MP2310
MP2300S
MP2000
MP2400
*1
MPU-01
CPU-201
MP3000
CPU-201(SUB)
*1 The firmware version of the MPU-01 to be supported is Ver. 2.86 or later.
*2 Please refer to the MPU-01 Manual for the supported list of Main CPUs.
*3 The firmware version of the CPU-201 to be supported is Ver. 1.06 or later.
 Connection Configuration
• 1:1 Connection
GP-Pro EX Device/PLC Connection Manual
Link I/F
Ethernet port on 218IF-01
Ethernet port on 218IF-02
Ethernet Connector on
CPU unit
Ethernet port on 218IF-01
Ethernet port on 218IF-02
Ethernet Connector on
CPU unit
Ethernet port on Main CPU
or
Ethernet port on 218IF-01
Ethernet Connector on
CPU unit
Ethernet Connector on Main
CPU (CPU201)
*3
Ethernet Connector on
CPU201(SUB)
MP/INVERTER/SERVO Ethernet Driver
SIO Type
Ethernet (UDP)
Ethernet (UDP)
Ethernet (UDP)
Ethernet (UDP)
Ethernet (UDP)
Ethernet (UDP)
*2
Ethernet (UDP)
Ethernet (UDP)
Ethernet (UDP)
Ethernet (UDP)
3
Setting Example
"3.1 Setting Example 1"
(page 13)
"3.4 Setting Example 4"
(page 22)
"3.2 Setting Example 2"
(page 16)
"3.3 Setting Example 3"
(page 19)
"3.4 Setting Example 4"
(page 22)
"3.2 Setting Example 2"
(page 16)
"3.12 Setting Example
12" (page 43)
"3.9 Setting Example 9"
(page 37)
"3.15 Setting Example
15" (page 51)
"3.9 Setting Example 9"
(page 37)