Communication Settings - YASKAWA MP Manual

3

Communication Settings

Examples of communication settings of the Display and the External Device, recommended by Pro-face, are
shown.
3.1 Setting Example 1
 Settings of GP-Pro EX
 Communication Settings
To display the setup screen, from the [Project] menu, point to [System Settings] and select [Device/PLC].
 Device Setting
To display the [Individual Device Settings] dialog box, from [Device-Specific Settings] in the [Device/PLC]
window, select the External Device and click [Settings]
[Device-Specific Settings] in the [Device/PLC] window, click [Add Device] to add another External Device.
 Notes
• Check with a network administrator about IP address. Do not set the duplicate IP address.
• Set IP address on the External Device address in the [Individual Device Settings] dialog box.
• You need to set IP address on the Display in the offline mode of the Display.
GP-Pro EX Device/PLC Connection Manual
MP/INVERTER/SERVO Ethernet Driver
. To connect multiple External Devices, from
13