Cameras In Daisy Chain - TANDBERG Profile 42” Manual

Profile
Contents Introduction
Contents Introduction
The PrecisionHD 1080p
camera,
cont...

Cameras in daisy chain

A single daisy chain can have up to three cameras
when using Codec C60.
Cascaded cameras
The sockets named Extra Camera and Power In
are used when connecting cameras in daisy chain.
HDMI and HD-SDI. The HDMI and HD-SDI can
be used simultaneously on the same camera.
Power. The first camera in the chain is powered
up from the codec by the VISCA camera control
cable. Additional cameras must use the 12V DC
Power in.
Extra camera cable. The daisy chained
cameras are connected by using the VISCA
Extra Camera cable between the Extra Camera
In and Codec Control In sockets
D14324.03—AUGUST 2009
Getting started About the menus
Getting started About the menus
Example. Three daisy chained TANDBERG PrecisionHD 1080p cameras.
Main
camera
Connect to the Camera
Control socket on the
Codec. When used with
TANDBERG Codecs, this
first camera will need no
power supply connected.
The Settings menu The Settings library
The settings menu Settings Library
Power in
12V DC
Second
camera
RJ11–RJ45
Connect to the Connect to the
Video Input 1 Video Input 2
on the codec on the codec
Cameras Cameras Appendices
Cameras Appendices
Power in
12V DC
Third
camera
RJ11–RJ45
Connect to the
Video Input 3
on the codec
Administrator Guide
Contact us
Contact us
VISCA™ is a trademark of Sony Corporation
49