The Experimental Menu - TANDBERG Profile 42” Manual

Profile
Contents Introduction
Contents Introduction

The Experimental menu

The Advanced configurations menu has an option called Experimental. The settings within this menu can
be used 'as is' and will not be documented.
NOTE! The Experimenal menu WILL change.
Experimental Audio Equalizer [1..8] Section [1..6] a1:
Sets the a1 coefficient for the given equalizer ID and section number.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example:
Experimental Audio Equalizer 1 Section 1 a1: "0.0"
Experimental Audio Equalizer [1..8] Section [1..6] a2:
Sets the a2 coefficient for the given equalizer ID and section number.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example:
Experimental Audio Equalizer 1 Section 1 a2: "0.0"
Experimental Audio Equalizer [1..8] Section [1..6] b0:
Sets the b0 coefficient for the given equalizer ID and section number.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example:
Experimental Audio Equalizer 1 Section 1 b0: "0.0"
Experimental Audio Equalizer [1..8] Section [1..6] b1:
Sets the b1 coefficient for the given equalizer ID and section number.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example:
Experimental Audio Equalizer 1 Section 1 b1: "0.0"
Experimental Audio Equalizer [1..8] Section [1..6] b2:
Sets the b2 coefficient for the given equalizer ID and section number.
The system has 8 user defined equalizers, each made up of 6 second order IIR sections. See the Appendix,
Equalizer section.
Example:
Experimental Audio Equalizer 1 Section 1 b2: "0.0"
Experimental Audio Input Line [1..4] Equalizer ID:
Select equalizer ID[1...8].
Example:
Experimental Audio Input Line 1 Equalizer ID: 1
D14324.03—AUGUST 2009
Getting started About the menus
Getting started About the menus
<S: 0, 32>
<S: 0, 32>
<S: 0, 32>
<S: 0, 32>
<S: 0, 32>
<1..8>
The Settings menu The Settings library The Settings library
The settings menu Settings Library
We recommend you visit the TANDBERG web site regularly for updated versions of the manual.
Go to: http://www.tandberg.com/docs
Experimental Audio Input Line [1..4] Equalizer Mode:
Determines whether or not the selected equalizer is enabled.
On: Use the selected equalizer
Off: No equalizer
Example:
Experimental Audio Input Line 1 Equalizer Mode: Off
Experimental Audio Input Microphone [1..4] Channel:
Defines whether the microphone input is a mono signal or part of a multichannel signal.
Left: The microphone input signal is the left channel of a stereo signal.
Right: The microphone input signal is the right channel of a stereo signal.
Mono: The microphone input signal is a mono signal.
Example:
Experimental Audio Input Microphone 1 Channel: Mono
Experimental Audio Input Microphone [1..4] Equalizer ID:
Select equalizer ID[1...8]
Example:
Experimental Audio Input Microphone 1 Equalizer ID: 1
Experimental Audio Input Microphone [1..4] Equalizer Mode:
Determines whether or not the selected equalizer is enabled.
On: Use the selected equalizer
Off: No equalizer
Example:
Experimental Audio Input Microphone 1 Equalizer Mode: Off
Experimental Audio Output Line [1..6] Equalizer ID:
Select equalizer ID[1...8]
Example:
Experimental Audio Output Line 1 Equalizer ID: 1
Experimental Audio Output Line [1..6] Equalizer Mode:
Determines whether or not the selected equalizer is enabled.
On: Use the selected equalizer
Off: No equalizer
Example:
Experimental Audio Output Line 1 Equalizer Mode: Off
Administrator Guide
Cameras Appendices
Cameras Appendices
<On/Off>
<Left/Right/Mono>
<1..8>
<On/Off>
<1..8>
<On/Off>
Contact us
Contact us
42