Connecting The Camera - TANDBERG Profile 42” Manual

Profile
Contents Introduction
Contents Introduction
The PrecisionHD 1080p
camera,
cont...

Connecting the camera

The HDMI and HD-SDI can be used
simultaneously.
HDMI cable
The HDMI cable delivered with the camera is
5 meters.
Maximum length is 15 meter with a category 2
certified good quality HDMI cable.
HD-SDI cable
The HD-SDI cable must be purchased
separately. The maximum recommendable
length of HD SDI cable is 100 m.
HDMI to DVI-D adapter
The HDMI to DVI-D adapter is used when
connecting to a TANDBERG MXP codec or
TANDBERG Video Switch
D14324.03—AUGUST 2009
Getting started About the menus
Getting started About the menus
Power supply connection
is NOT needed when the
camera is used with a
TANDBERG Codec.
The Settings menu The Settings library
The settings menu Settings Library
Connecting HDMI HD Video out on camera to
If you need to connect the camera to a TANDBERG Video Switch or to a system with a DVI-D socket, use
the enclosed HDMI to DVI-D adapter.
Administrator Guide
Cameras Cameras Appendices
Cameras Appendices
HD-SDI socket
HDMI and HD-SDI
can be used simultaneously.
Connect the camera control cable, RJ45 to RS-232.
Visca™ protocol is supported.
HDMI 1 In on the Codec.
VISCA™ is a trademark of Sony Corporation
Contact us
Contact us
46