York Fitness espace Owner's Manual page 9

8. Attach the pedals
1. Attach the straps to the pedals (the straps
and pedals are marked L and R, match each
strap to the corresponding pedal)
2. Attach the L pedal to the left crank arm
– this pedal will thread on anti-clockwise
3. Attach the R pedal to the right crank arm
– this pedal will thread on clockwise
Final Checks
Your cycle is now assembled. Please make the following final checks before you use it for the first time.
•
Make sure all screws / bolts are tightened
•
Make sure you have positioned it on a flat, level surface
Power Up
•
Plug one end of the adaptor into your cycle as shown
•
Plug the other end into a suitable AC outlet (220 – 240v – 50Hz)
3
26
3
26
3
26
66
9