Common Errors - Paxar Monarch Sierra Sport 2 9460 Operator's Handbook Manual

Problem
Supply does
not calibrate
properly.

Common Errors

The following is a list of common printer errors you
may receive. If you receive a message not listed
here, see your System Administrator or call the
Technical Support number listed on the back of this
manual.
Error
025
Invalid Length
101
Invalid/Missing
409
Memory Full
410
Parity
411
Framing
413
Overrun
611
Error Loading
612
Invalid Data
613
Invalid Data
4-2 Troubleshooting
Solution
Check the on-demand, black mark, die
cut, or non-indexed sensors. Refer to the
System Administrator's Guide for more
information. You may need a new sensor.
Description
String length is outside the range 0 to
2710.
The format referenced by batch is not
in memory.
The printer memory is full. Delete
unnecessary formats or graphics from
memory.
Parity mismatch. Check your parity
settings at the printer and at the host.
Framing error (baud rate mismatch).
Check your baud rate settings at the
printer and at the host.
Online receive queue is full. Check for
a flow control problem.
Font, bar code, or density in the batch
does not fit the format.
The data in this line of the batch is
missing or does not match the format.
Reference point off supply.