Paxar Monarch Sierra Sport 2 9460 Operator's Handbook Manual page 22

Use any of the following items to clean the printhead:
♦ A soft cloth moistened with isopropyl alcohol.
Use isopropyl alcohol on the interior
areas only, never on the exterior.
♦ A Monarch Cleaning Pen (part number 114226).
To clean the printhead, platen roller, and supply
sensors:
Turn off the printer by pressing and holding the P
1.
button until the display is blank.
remove adhesive or label particles
2. Push down on the release buttons on both sides of
the printer to open the supply door. The supply
door should swing open.
Release
Button
3. Lay the printer on its back.
3-2 Care & Maintenance
CAUTION
Do not use sharp objects to
from the printhead area.