Programming Procedure; Test - Boulter Camray 5 Installation & Maintenance Manual

8. OFF1 - HW OFF
9. ON2
10. OFF2 - HW OFF
11. ON3
12. OFF3 - HW OFF

4:11.8 PROGRAMMING PROCEDURE

To create a programme the same method is used as for setting the Clock.
With the Timer/Programmer in the operating mode and the Display showing the correct Time and Day. (Refer
to section 4:11.4)
Display >
Press twice
Display >
Press to answer
Display >
Press to change ON1 in sequence or -
Press to continue through sequence
Display >
Use and to change time by 10 min intervals.
Press - time is now set.
Continue through sequence pressing
On completion Press

4:11.9 TEST

The Test facility is a unique feature of the Boulter Programmer. Test enables a quick review of the 7 day
programme.
TO USE 'TEST' With the Timer/Programmer in the operating mode and the Display showing the correct Time
and Day.
file://D:\PL47000\PL47000.htm
20. OFF1
- HW ON 21. ON2
22. OFF2
- HW ON 23. ON3
24. OFF3
(after )
to change setting and
three times to return to operating mode.
- HW OFF
- HW ON
- HW OFF
- HW ON
- HW OFF
to continue.
Page 32 of 67
14/04/2005