Table of Contents
Advertisement
Page 25 of 67
4:9.2 Burner Pump for Single Pipe System
The burner is supplied set for single pipe operation. The return port is plugged and the Bypass Screw is not
fitted. See
Fig.
4:9b.
BOULTER BUDERUS CAMRAY 5 PAGE 17
4:10 CONTROL PANEL
The Control Panel is pre-wired and fitted to the Boiler ready for connection to the system wiring.
4:10.1 Connecting Control Panel
If a Boulter Programmer is to be fitted refer to
section 4:11
of this manual for fitting instructions before
connecting mains.
1. Connect the mains electrical supply to the 3 pin Mains Plug. See
Fig.
4:10a.
file://D:\PL47000\PL47000.htm
14/04/2005
Hide quick links:
Advertisement
Table of Contents
