Setting The Clock; Notes On Programming - Boulter Camray 5 Installation & Maintenance Manual

4:11:4 SETTING THE CLOCK

1. Switch ON the Electrical Supply to the Boiler - the Clock Display should come on.
2. Press and release
Display >
3. Press and release once to answer. The Day on the Display will flash.
Display >
4. Use or to select Day.
5. Press and release
6. The Hour on the display will flash.
Display >
Use the or to change Hour.
The Clock is a 12 hour display - check the AM and PM.
7. Press and release the
8. The Minutes on the display will now flash.
Display >
Use the or to change Minutes.
9. Press and release
Display >
For Programming refer to
HELP!!
If during resetting Clock or Programme you get confused and wish to start again - Press
same time for a moment. The unit will revert to 12:00am (midnight) and the 'Standard' Programme.

4:11.5 NOTES ON PROGRAMMING

file://D:\PL47000\PL47000.htm
once.
once.
once.
four times to revert to operating mode.
section 4:11.8
Page 30 of 67
and at the
14/04/2005